Plastic case mold temperature is an important part of the injection mold. If the temperature of the plastic case shell mold is well controlled, the processed products will be good products; if the temperature of the plastic mold is not well controlled, the processed plastic case shell products may be scrapped.
So, what kind of influence does the temperature of the plastic mold have on the processed products?
1. The temperature of plastic mold is too high, it will make the product deformed during and after demoulding, and reduce its shape and standard accuracy.
2. The temperature difference between the mold core and the cavity is too large, and the plastic parts become unevenly short, causing the bending deformation of the products and affecting the appearance of the parts.
3. The temperature of the plastic mold will reduce the standard accuracy of the product, thus reducing the qualified rate of the product.
4. For some crystalline plastics, the use of high temperature of plastic mold is beneficial to the crystallization process, to prevent the change of standard attack during storage or application.
5. In plastic flexible plastic, the use of plastic mould at low temperature can reduce the shortening rate, improve the standard accuracy of the parts, shorten the molding cycle and improve the production efficiency.
6. In the low temperature filling mold, if the melt speed is not fast enough, the internal stress of the product increases, easy to cause warpage deformation or application of cracking, especially some high viscosity plastics.
7. plastic shell mold temperature will reduce the fluidity of the plastic melt, so that the parts are not clear or even unsatisfactory filling, or in the process of filling the mold due to the melt front temperature drop too much and produce obvious cold seams, resulting in a decline in the mechanical properties of the product, plastic mold temperature is too low, but also make the product surface is not smooth, impact a variety of surface defects.
