PC and ABS have a certain compatibility, however, the compatibility of PC and ABS is greatly affected by the type of the two components, such as the matching and processing process. In order to improve the interface compatibility, the most useful way is to participate in the compatibility agent in the blending system. Generally, there are: maleic anhydride MAH graft POE, ABS graft, PE graft, polystyrene maleic anhydride graft copolymer (SMA), acrylic acid or methacrylate copolymer, amine group, SAN, two-component capacitance, etc. The following is a detailed analysis by Shenzhen Hongfa Shunda plastic shell company to analyze, take a look at it.
Small plastic shell processing with PC/ABS alloy can summarize the excellent features of both. On the one hand, the progress of ABS heat resistance and tensile strength, on the other hand, reduce the viscosity of the PC melt, improve processing functions, reduce the product stress and impact strength of the product thickness sensitivity.
Also, modified PBT material is also possible, such as: PBT with 30% glass fiber, and ABS or PC/ABS alloy. The material is suitable for connectors, switch parts, household appliances, accessory parts, small electric cover (heat resistance, flame retardancy, electrical insulation, molding processability), car parts and accessories (such as external parts: mainly corner gesan, engine heat release hole cover, etc.; internal parts: mainly internal mirror brace strip, wiper bracket and control system valve; car electrical parts: car incineration coil strand and various electrical Connector, etc.) (PBT for cars is not as many as nylon, poly carbon and poly formaldehyde, but with the presentation of low warpage PBT, the future will be more use in car parts), and mechanical equipment (such as video tape recorders with drive shaft, electronic computer cover, mercury lamp cover, iron cover, baking machine parts and a lot of gears, cams, buttons, electronic meter housing, camera parts (with heat-resistant, high quality, high quality). (heat-resistant and flame-retardant) parts of cameras, etc.).
But ABS, despite its wide range of uses, does not have the advantage in terms of resistance and strength, but of course the price advantage is still there. Small plastic shell processing will generally have to compare prices. If the three cost comparison, ABS lowest, modified PBT and PC/ABS alloy should be about the same, perhaps PBT slightly higher
